 |
|
| MDS 1101 (Wizard Wraps) |
|
Flange Wizard® Tools
|
| Material Safety Data Sheet for NI-2085 |
| May be used to comply with OSHA's Hazard Communication Standard 29 CFR 1910.1200 Standard must be consulted for specific requrements. |
| |
| NI-2085 is a high density, high performance matrial used in a wide variety of applications. Offers excellent resistance to water, coolant, oil and fuels. It has excellent strength and stability characteristics. Nitrile butadlene binder. For applications with intermittent operating temperatures up to 375°F (190°C). |
| ORIGINAL PROPERTIES |
TYPICAL VALUES |
FLUID IMMERSIONS |
| Density - g/cm3 (lbs./cu.ft.) (min.) |
90 (1.44) |
Fuel B - 5 Hours @ Room Temperature |
| Compression @ 5000 psi (34.5 MPa) (%) |
15 |
Weight Increase (%) 15 |
| Compression @ 1000 psa (6.9 MPa) (%) |
10 |
Gauge Increase (%) 10 |
| Recovery @ 5000 psi (34.5 MPa) (%) |
60 |
ASTM Oil #3 - 5 Hrs. @ 300°F (149°C) |
| Tensile Strength, CD - pis (MPa) |
2250 (15.5) |
Weight Increase (%) 20 |
| |
|
Gauge Increase (%) 7 |
| |
|
Compression @ 5000 psi (34.5 MPa) (%) 18 |
| |
|
Tensile Less (%) 16 |
| NOTE: NI-2085 is an ASBESTOS FREE gasket material |
| HAZARDOUS INGREDIENTS / IDENTITY |
INFORMATION |
|
| Material or Component |
% |
Hazardous Data |
| Talc |
50-60 |
TL.V=2mg/m3 as respirable dust |
| Inert Ingredients |
35-40 |
TL.V=10mg/m3 as nuisance dust |
| Carbon Black |
<5 |
TL.V=3.5mg/m3 |
| Soluvle Aluminum Salts |
<5 |
TL.V=2mg/m3 |
| Talc is Tremolite Free |
|
|
| PHYSICAL CHEMICAL CHARACTERISTICS |
| Appearance and Color |
-Smooth black solid sheet with slight latex odor |
| Boiling Point |
-N/A |
| Vapor Pressure (mm Hg.) |
-N/A |
| Vapor Density (A/R=1) |
-N/A |
| Specific Gravity (H2)=1) |
-1.4136 |
| Melting Point |
-N/A |
| Evaporation Rate (Butyl Acetate -1) |
-N/A |
| Solubility in Water |
-Insoluble |
| FIRE AND EXPLOSION HAZARD DATA |
| Flashpoint (Method Used) |
-N/A |
| Flammable Limits |
-N/A |
| Extinguishing Media |
-Water, Carbon Dioxide, or Foam |
| Special Firefighting Procedures |
-Wear air pack |
| Unusual Fire and Explosion Hazards |
-This gasket material is not expected to burn easily |
| Conditions Contributing to Instability |
-N/A |
| Incomapatibility |
-N/A |
| Hazardous Decomposition on Byproducts |
-None Known |
| Hazardous Polymerization/Conditions to Avoid |
-Will not occur |
| Inhalation |
Signs of Overexposure: Irritation of the upper repsiratory tract, coughing, wheezing, and other symptoms of chronic obstructive lung disease. |
| Skin |
Signs of Overexposure: N/A |
| Eyes |
Signs of Overexposure: Mild irritation from excessive dust. |
| CARCINOGENICITY |
None |
| MEDICAL CONDITIONS AGGRAVATED BY CHEMICAL EXPOSURE |
Individuals with preexisting lung conditions may be agravated by exposure to dust. |
| EMERGENCY AND FIRST AIR PROCEDURES |
Wash Eyes if dust contamination occurs. Remove from are if breathing becomes troubled by dust. Wash hands if irritated. |
| PRECAUTIONS FOR SAFE HANDLING AND USE |
Vacuum and dispose in normal trash container |
| Respiratory Protection |
If dust is generated, a dust mask approved by NIOSH should be worn. |
| Eye Protection |
If dust is created, safety glasses may be worn. |
| Gloves |
N/A |
| other Protective Clothing or Equipment |
N/A |
| Work/Hygienic Practices |
Maintain Normal Cleanliness |
|
|
 |
Made in the USA |
|
|
|
|
|
|
|
|
|
|
Made in the USA |
|